New designed long shaft without C-clip Imported over-sized ball bearing Rotor dynamic balancing Specially for F3A aircraft
Product Description：
* Fully upgraded V2 rotor, with centrifugal fan design, which can bear much
more power.
* Designed especially for FAI F3A and F3M, tested by several pilots.
1) Long shaft without C-Clip. A pre-drilled spinner mount hole in the
front.
2) High quality over-sized ball bearings(3 PCS).
3) Dynamic balanced rotor. Precision assembled case.
4) Improved air-gap
5) Curve-shaped magnets. Adopt the highest grade NdFeb magnets.
6) 0.2mm laminations.
7) 220 centigrade degree high temperature wire
8) Thicker wires. 4 to 8 wires in parallel, to improve insulation and
impact resistance
9) Optimized KV. Improved
magnetic efficiency.
10) Light weight. XM6355DA weighs 560g.
11) There is motor supporter at the back of end-bell to further reduce
the vibration (Optional).
12) Supply front motor mount (sold separately) to install in front of the
firewall.
13) Classic Dualsky appearance with symbolic star shape.
Item Name：Xmotor DA Competition series brushless outrunners
Item No：| 57635 | XM6355DA-10-Competition | 278 RPM/V | 563g |
| 57636 | XM6355DA-11-Competition | 240 RPM/V | 566g |
| 57606 | XM6355DA-12-Competition | 222 RPM/V | 566g |
| 57812 | XM6355DA-13-Competition | 200 RPM/V | 566g |
| 57637 | XM6360DA-9-Competition | 242 RPM/V | 655g |
| 57608 | XM6360DA-10-Competition | 218 RPM/V | 655g |
| 57630 | XM6360DA-11-Competition | 199 RPM/V | 650g |
| 57634 | XM6360DA-12-Competition | 182 RPM/V | 642g |
